The evolution of plasma cutting
The evolution of plasma cutting
Plasma cutting has come a long way since it was first developed in the late 1950s by engineers at Union Carbide Corp.
Today it is one of the most widely used metal plate cutting processes for a large variety of industries.
Early plasma cutting systems were used primarily for cutting stainless steel and aluminum plate from 0.5 to more than 6
in. thick. These systems, primitive by today’s design standards, were the most practical method for cutting heavy nonferrous
plate. Most were mounted on XY cutting pantograph-style machines that used either photo-cell tracers to duplicate large black
line engineering drawings of the parts to be cut, or a magnetic tracer to follow the path of a steel template.
Engineers continuously worked on the process throughout the 1960s with the goal of improving cut quality and the life of
the consumable nozzles and electrodes in the cutting torch. Plasma began gaining momentum during this period as the process
improved and as users became aware of its ability to cut complex shapes in nonferrous materials at very high speeds.
In 1968 radial water injection was introduced. This patented nozzle technology used pure water injected radially around
the plasma jet to constrict the arc, increasing its energy density while improving nozzle cooling and thus allowing faster
cut speeds, higher-quality cuts, and the ability to cut carbon steels at speeds four to six times faster than an oxyfuel
At about that same time, XY coordinate drive cutting machine technology was being improved. Microprocessor control
technology started to become the brains of the XY motion control machines, allowing for better accuracy, higher cutting
speeds (necessary for the new-technology plasma systems), and higher levels of automation and productivity on the shop floor.
Through the 1970s plasma cutting technology replaced many oxyfuel-based steel cutting applications from 0.25 to 1 in.
thick, while still maintaining its stronghold on the stainless and aluminum markets. While plasma could cut steel thicker
than 1 in., the oxyfuel process still was a lower-cost alternative for heavier steel plate.
Timeline of Major Engineering Breakthroughs
With the baseline of plasma’s early history established, let’s take a look at some of the major engineering
breakthroughs with this technology:
1957 The plasma cutting process was developed and patented by Union Carbide as an extension of the gas tungsten arc
welding (GTAW) process.
1962-1967 Several new developments were completed in consumable design, and the dual flow torch was designed to help
improve consumable life and cut quality on nonferrous materials.
1968 The water injection process was commercialized. This process allowed for cutting with clean, square-cut edges and
faster speeds, as well as cutting of carbon steels with acceptable cut quality.
1970-1979 The water table and water muffler, designed to provide fume and smoke control, debuted. Automated arc voltage-
based height controls for more consistent cut quality and longer consumable parts life emerged.
1980-1984 Oxygen-based plasma cutting systems that helped improve edge squareness and edge metallurgy (softer, weldable
edge) and allowed for cutting carbon steels at lower power levels and higher cut speeds (see Figure 2) were introduced.
1984-1990 Many developments in the air plasma cutting process allowed for better portability and lower power levels for
hand cutting and mechanized thin-sheet cutting.
1990 Better power supply designs using pulse width-modulated, current-controlled outputs were developed. Some systems
started to use lighter-weight, smaller inverter technology power supplies suitable for portable, hand-held plasma systems.
1992 Long-life oxygen process technology was introduced. This was essentially a microprocessor-controlled method of
controlling plasma gas ramping pressures as well as power supply output amperage. It helped increase typical oxygen plasma
consumable parts life by four to six times; improved parts consistency; and helped lower the cost of plasma cutting.
1993 High-definition plasma, a technique that required the previous long-life oxygen technology to implement, was
developed. This process allowed for a new nozzle design that increased the energy density of an oxygen plasma arc by as much
as four times, allowing for squarer, cleaner cuts in all material thicknesses.
1996 Automated gas flow control systems emerged. They interfaced digitally with the machines’ CNCs. These gas flow
controls eliminated some of the potential for machine operator-related errors in setting parameters for the cutting process.
1996-2006 Many developments occurred relating to improving cut quality and productivity and automating the many process
cut parameters. These included integrated plasma, a system that closely coupled the CNC, the plasma power supply, the gas
flow control, the CAM software, and the height control system to automate the process. With this expertise built into the
system, the machine operator’s job became much simpler, and the process relied less on operator expertise.
Recent Technology Developments
In the last seven years, developments in plasma cutting technology have come at a fast pace. The latest revision on
high-definition machines is their full integration with the CNC machines they are coupled with. New CNCs have touchscreen
accessibility, minimizing the number of buttons involved in operating a plasma cutting machine and making operation as simple as almost any Windows?-based software. Operator training
has been simplified on even the largest, most complex CNC plasma cutting machines.
The operator’s job also has been made easier with improvements in auto-calibrating height control functionality. The
operator does not need to make adjustments as the consumable parts in the torch wear out.
Hole cutting has been improved with a large database of information in the CAM software that automatically recognizes CAD
features and implements the best possible cut path and plasma cutting parameters, including on-the-fly shield gas changes
that nearly eliminate the normal taper found in plasma-cut holes on steel (see Figure 3). This process is transparent to the
machine operator and system programmer, eliminating the need for them to be experts.
Improvements in cut-to-cut cycle times have been incorporated into CAM software. The software automatically recognizes
areas of a full cutting nest (multiple parts) and modifies the traverse time, torch retract time, and gas preflow time to
decrease production times and improve product throughput.
Nesting software now applies the lead-in points in the most effective way to avoid traversing over areas prone to
collisions with previously cut parts.
Improved plate beveling software has simplified the integration and operation of a bevel head with XY CNC cutting
machines. This advancement, again associated with the system’s CAM software, saves much of the programmer/operator trial-
and-error testing that has always been necessary to hold the best tolerances on plate edge beveling applications, such as
Very new vented nozzle and gas mixing technology has helped improve stainless steel edge quality. Edges are squarer,
shiny, and weldable.
Air plasma cutting systems from the major manufacturers also improved dramatically in terms of cut quality, consumable
life, and duty cycles. These systems, primarily designed for portable and in-shop hand-held cutting applications, now are
available with quick-change mechanized torches and interface easily to a variety of lower-cost CNC machines. Systems are
available from a 30-amp, toaster-sized unit that operates on 120-V household current to sever materials up to 0.5 in. thick,
to a 125-amp, 100 percent duty cycle industrial unit that can sever 2.25-in. materials. Both portable systems can be used
with a hand torch or can be mechanized for a variety of automated cutting applications
Industrial mechanized systems typically are 100 percent duty cycle, available with machine torches, and designed to use a
variety of compressed gases to fine-tune the cut quality for different materials. These systems are available in various
sizes and capacities from 130 to 800 amps.
Many other advances have been made to improve reliability, performance, consumable life, cut quality, and ease of use
since the first plasma system was created. The process shares the cutting market with laser cutting, abrasive waterjet, and
oxyfuel cutting, all of which deliver accuracy, productivity, and long-term cost-effectiveness when used for the appropriate
What can be considered light duty?
A light duty plasma cutting machine can become a need for any workshop, artist, contractor, etc. that so
far have been using oxy-fuel and is ready to make the leap to a better solution.
Actually, after experiencing a handheld plasma machine, almost nobody wants to
return to oxy-fuel.
That is because even a light-duty plasma cutting system can make a big difference
in efficiency and productivity.
So, in this post, we are going to consider what a light-duty plasma cutting
system is and which one you should get.
But before getting into this amazing topic, let’s consider what plasma cutting
Most people classify plasma cutting systems in light, medium and heavy-duty. A
handheld plasma cutting machine used in a small cutting table can be considered light-duty.
In general terms, a medium-size cutting table powered by some plasma cutting
machine would be a medium-duty system.
A mechanized cutting system, which could occupy the heavy-duty slot, can be built in
a stronger structure and composed by more than one cutting machine.
But that classification is not a general rule for plasma cutting manufacturers.
For the sake of this post, as quoted before, we are considering a handheld or
portable plasma cutting machine as a light-duty one.
Now, before buying a light-duty plasma system, you may need to know when to use a
portable and when to use an automated system. So, let’s consider some of it.
What Are The Advantages Of Fiber Laser Cutting Machine
Fiber laser is well received in the market now, because of its outstanding advantages of good beam quality and high
conversion efficiency, it is widely loved in some finishing fields. At present, the proportion of fiber laser in the
industrial field is close to 50%, which is also a kind of active choice for products in many industrial applications.
Compared with traditional gas and solid-state lasers, fiber lasers have great advantages as frequency conversion light
sources. In this article, we are going to talk about what is fiber laser cutting machine, what are the features, advantages &
benefits of fiber laser cutting machine and applications &
uses of fiber laser cutting machine.
What Is A Fiber Laser Cutting Machine?
Fiber laser cutting machine is a new type of machine in the world, which is used
to output high energy density laser beam. The laser beam is concentrated on the surface of the workpiece, so that the area of
ultra-fine focus on the workpiece is instantly melted and evaporated, and the spot is moved through the CNC mechanical
system. Automatic cutting by illuminating the position. Compared with large volume gas laser and solid-state laser, it has
obvious advantages and has gradually become an important choice in high-precision laser processing, lidar system, space
technology, laser medicine and other fields.
The optical plate fiber laser cutting machine can be used for both plane cutting and oblique cutting,
with neat and smooth edges. It is suitable for high precision cutting of metal plate. At the same time, the manipulator can
replace the original five axis laser for 3D cutting. Compared with ordinary CO2 laser cutting machine, it saves more space
and gas consumption, and has high photoelectric conversion rate. It is a new energy-saving and environmental protection
product, and also one of the world’s leading technology products.
- Creado: 27-09-21
- Última sesión: 27-09-21